- Resin Traps collectors manufacture Related
- Resin Traps collectors manufacture News
-
- Resin Traps collectors manufacture Tips
-
Resin Traps collectors manufacture
|
Resin trap screen predominantly used in water treatment processes namely in ‘Ion Exchange’ and other numerous media filter systems, Completion products offers a resin trap screen. This screen system is primarily used as a safety device and is positioned immediately after the outlet nozzle of the vessel/reactor.
The profile wire screen element included with the main housing as depicted below eliminates the migration and loss of expensive resin/media, whilst at the same time protecting your pumping equipment. A combination of different Profile Wire sizes and slot openings can be used depending on your circumstances. Completion products will also determine the effective screen open area in order to improve upon efficiency and minimise the pressure drop.
1.Eliminates mass resin/media loss into piping distribution system
2.Prevents loss of resin during backwashing
3.Protects downstream equipment and pumps
4.Visual detection of minor resin/media losses in advance of major equipment failure
High weld strength
Higher accuracy and consistency of wire gap
Lower surface roughness
Single piece cylinder construction (As opposed to welded patched cylinders)
Axially-seamless cylinder construction
the resin trap is designed and installed to prevent the loss of media in the event of:
1.Underdrain failure
2.Lateral failure
3.Strainer failure